Please reach us at general@stdgun.com if you cannot find an answer to your question.
It is a double action revolver that fires 2 - 22 magnum shells simultaneously, holding 8 rounds in the cylinder with 4 pulls of the trigger before needing to be reloaded. This is protected by US and Foreign Patent.
In our opinion, it is the stopping power of 2 shells at once and the simplicity of use compared to a semi-automatic gun. As well as the huge factor of safety in carrying a very small compact double action system with redundancy.
Many people cannot pull a double action revolver back and control it, and many (females and elderly) cannot cock a slide on an automatic. In our testing, everyone was able to shoot and control the S333 system without sacrificing any fire power. Not subject to misfires or loaded situation, even when the magazine is out.
It is a piece that protrudes from the trigger, acting as a safety where the trigger cannot be pulled, unless engaged with the toggle.
It protects the gun from accidental discharge, unless the trigger is pulled all the way back.
Yes.
With 2 magnum shells hitting simultaneously, it has enormous stopping power with virtually no recoil. It is light weight and small, and there is nothing like the redundancy when you need to protect yourself.
We feel it is the safest cartridge with the fact of having to penetrate the rim for firing, as opposed to a soft inserted primer. This adds another level of safety without sacrificing stopping power due to the fact that 2 shells are going off simultaneously as opposed to 1 shell. So if you had a bad shell, there is still 1 more shot available. 9. Can I fire 22 long rifle shells?
No, it is only made for 22 magnum.
It does the job of protecting the trigger against accidental firing and protection, yet doesn’t encumber you for fast retrieval.
This allows for superior control and a smoother pull for people that are challenged with trigger strength, as you are cocking and revolving the cylinder every time you pull the trigger.
The ATF has determined after examining the sample that is classified as a firearm under the gun control act. This means it transfers just as any other handgun would in your state.
From a solid block of 7075 pre-hardened aluminum billet.
1 lb. 3 oz. Unloaded.
Approximately 5” x 5”.
Hard coat anodized and synergistic coated.
A specially formulated high strength polymer.
4140 steel.
Built in quick sighting system with red dot.
You can purchase direct from Standard Manufacturing, one of our authorized dealers, and we also sell to major distributors.
For "S333", many of the crime statistics report that when a gun is actually needed and used, it will happen In 3 yards or less, 3 seconds or less, and 3 shots or less. We design the gun to fit that criteria. For "Thunderstruck", we came up with this name due to the enormous energy from the 2 magnum bullets hitting simultaneously.
Not that we are aware of.
The official packaging is a unique box with an embossed picture of the gun on it, gold sealed labels, a cable lock under the form fitted tray with a manual and decal.
Yes, they are available on Standard Manufacturing’s website.
Yes.
It is 1 year from the date you register the gun on Standard Manufacturing website and it must be registered within 10 days of purchase date. Please send through UPS ground to Standard Manufacturing, 100 Burritt St. New Britain, CT. PLEASE NOTE THAT WE DO NOT PROVIDE RETURN LABELS. YOU ARE RESPONSIBLE FOR SENDING IN YOUR REPAIR.
They are titanium inserts, they add longevity and strength to the gun.
This is where the cylinder inserts into the frame. It will make a small mark.
The recoil will leave a small shadow mark.
That is from the revolving of the cylinder, perfectly normal.
Before the gun is put in the box, it is heavily inspected to be defect free.
The S333 is CA compliant, but not approved for MA or MD.
Actually, it is just the opposite. After trying many different situations, we believe the trigger system we have devised is the easiest, safest, and most comfortable way to shoot this gun. Through out testing, we found out that 2 fingers makes for a much smoother pull of the trigger and the chances of an accidental discharge are extremely diminished. Getting used to our 2 trigger system is very instinctive and people that have trouble shooting a double action gun safely will find this very easy to do.
With the geometry of our hammer and dual spring system, we were able to fire thousands of rounds with 100% dual ignition.
All S333s are shot tested and regulated with the following ammo: CCI Maxi Mag 40 Grain, Maxi Mag 40 Grain HP, and PMC Predator 40 Grain loads. We find there are large quality control issues with some ammo that cause issues with this gun.
The Gen I is currently legal in CA. But not MD or MA.
The Gen II is currently illegal in CA, MD, and MD.
We have tested this gun extensively and with the geometry of our hammer and dual spring system we have fired thousands of rounds with 100% dual ignition.
Normally true, but on our patented design with dual springs and a special hammer and firing pin configuration, we shoot thousands of bullets with 100 % ignition on both sides. Remember, if you had a misfire it would be highly unlikely you would get it on both sides and you would just revolve to the next cylinder.
This is a precision manufactured part where we are able to perfectly align 2 cylinders and 2 barrels every time which we don’t believe has been done before in a side by side revolver.
S333 ATF Compliance Letter (pdf)
DownloadCopyright © 2023 Standard Manufacturing LLC - All Rights Reserved.
Powered by GoDaddy